Click
here to close Hello! We notice that
you are using Internet Explorer, which is not supported by Echinobase
and may cause the site to display incorrectly. We suggest using a
current version of Chrome,
FireFox,
or Safari.
???displayArticle.abstract???
Although the evolution of tooth structure seems highly conserved, remarkable diversity exists among species due to different living environments and survival requirements. Along with the conservation, this diversity of evolution allows for the optimized structures and functions of teeth under various service conditions, providing valuable resources for the rational design of biomimetic materials. In this review, we survey the current knowledge about teeth from representative mammals and aquatic animals, including human teeth, herbivore and carnivore teeth, shark teeth, calcite teeth in sea urchins, magnetite teeth in chitons, and transparent teeth in dragonfish, to name a few. The highlight of tooth diversity in terms of compositions, structures, properties, and functions may stimulate further efforts in the synthesis of tooth-inspired materials with enhanced mechanical performance and broader property sets. The state-of-the-art syntheses of enamel mimetics and their properties are briefly covered. We envision that future development in this field will need to take the advantage of both conservation and diversity of teeth. Our own view on the opportunities and key challenges in this pathway is presented with a focus on the hierarchical and gradient structures, multifunctional design, and precise and scalable synthesis.
Amini,
Shape-preserving erosion controlled by the graded microarchitecture of shark tooth enameloid.
2020, Pubmed
Amini,
Shape-preserving erosion controlled by the graded microarchitecture of shark tooth enameloid.
2020,
Pubmed
Arango-Santander,
Chemical, structural and mechanical characterization of bovine enamel.
2020,
Pubmed
Bajaj,
On the R-curve behavior of human tooth enamel.
2009,
Pubmed
Bajaj,
Role of prism decussation on fatigue crack growth and fracture of human enamel.
2009,
Pubmed
Barber,
Extreme strength observed in limpet teeth.
2015,
Pubmed
Bastek,
Inverting the structure-property map of truss metamaterials by deep learning.
2022,
Pubmed
Bechtle,
Hierarchical flexural strength of enamel: transition from brittle to damage-tolerant behaviour.
2012,
Pubmed
Beniash,
The hidden structure of human enamel.
2019,
Pubmed
Bentov,
Enamel-like apatite crown covering amorphous mineral in a crayfish mandible.
2012,
Pubmed
Chai,
Remarkable resilience of teeth.
2009,
Pubmed
Chan,
Nano-scale structure and mechanical properties of the human dentine-enamel junction.
2011,
Pubmed
Cheng,
Bone-Inspired Mineralization with Highly Aligned Cellulose Nanofibers as Template.
2019,
Pubmed
Cui,
New observations of the hierarchical structure of human enamel, from nanoscale to microscale.
2007,
Pubmed
Cuy,
Nanoindentation mapping of the mechanical properties of human molar tooth enamel.
2002,
Pubmed
DeRocher,
Publisher Correction: Chemical gradients in human enamel crystallites.
2020,
Pubmed
Deng,
Black Drum Fish Teeth: Built for Crushing Mollusk Shells.
2022,
Pubmed
Elder,
Nanomaterial Patterning in 3D Printing.
2020,
Pubmed
Enax,
Structure, composition, and mechanical properties of shark teeth.
2012,
Pubmed
Enax,
Ultrastructural organization and micromechanical properties of shark tooth enameloid.
2014,
Pubmed
Faivre,
From bacteria to mollusks: the principles underlying the biomineralization of iron oxide materials.
2015,
Pubmed
Farah,
Mineral density of hypomineralised enamel.
2010,
Pubmed
Fong,
Dental histology of Coelophysis bauri and the evolution of tooth attachment tissues in early dinosaurs.
2016,
Pubmed
Frank,
A Protocol for Bioinspired Design: A Ground Sampler Based on Sea Urchin Jaws.
2016,
Pubmed
,
Echinobase
Fraser,
The Dental Lamina: An Essential Structure for Perpetual Tooth Regeneration in Sharks.
2020,
Pubmed
Gao,
Contact fatigue of human enamel: Experiments, mechanisms and modeling.
2016,
Pubmed
Gladman,
Biomimetic 4D printing.
2016,
Pubmed
Goetz,
Tailored order: the mesocrystalline nature of sea urchin teeth.
2014,
Pubmed
,
Echinobase
Gordon,
Dental materials. Amorphous intergranular phases control the properties of rodent tooth enamel.
2015,
Pubmed
Gordon,
Selective formation of metastable ferrihydrite in the chiton tooth.
2014,
Pubmed
Guidoni,
Enamel: From brittle to ductile like tribological response.
2008,
Pubmed
He,
Understanding the mechanical behaviour of human enamel from its structural and compositional characteristics.
2008,
Pubmed
He,
Nanoindentation creep behavior of human enamel.
2009,
Pubmed
He,
Enamel - a "metallic-like" deformable biocomposite.
2007,
Pubmed
Higgins,
Teeth as a source of DNA for forensic identification of human remains: a review.
2013,
Pubmed
Imbeni,
The dentin-enamel junction and the fracture of human teeth.
2005,
Pubmed
Jernvall,
Tooth shape formation and tooth renewal: evolving with the same signals.
2012,
Pubmed
Jheon,
From molecules to mastication: the development and evolution of teeth.
2013,
Pubmed
Keten,
Nanoconfinement controls stiffness, strength and mechanical toughness of beta-sheet crystals in silk.
2010,
Pubmed
Kreier,
Ancient tooth DNA reveals how 'cold sore' herpes virus has evolved.
2022,
Pubmed
Le Ferrand,
Magnetically assisted slip casting of bioinspired heterogeneous composites.
2015,
Pubmed
Lee,
Properties of tooth enamel in great apes.
2010,
Pubmed
Leung,
Shark teeth can resist ocean acidification.
2022,
Pubmed
Lew,
Role of the Mineral in the Self-Healing of Cracks in Human Enamel.
2022,
Pubmed
,
Echinobase
Li,
Bio-inspired nacre-like composite films based on graphene with superior mechanical, electrical, and biocompatible properties.
2012,
Pubmed
Lynch,
Hunter-Schreger Band patterns in human tooth enamel.
2010,
Pubmed
Ma,
The grinding tip of the sea urchin tooth exhibits exquisite control over calcite crystal orientation and Mg distribution.
2009,
Pubmed
,
Echinobase
Mao,
Synthetic nacre by predesigned matrix-directed mineralization.
2016,
Pubmed
Marcus,
Parrotfish Teeth: Stiff Biominerals Whose Microstructure Makes Them Tough and Abrasion-Resistant To Bite Stony Corals.
2017,
Pubmed
McCollum,
Evolution and development of teeth.
2001,
Pubmed
Mirmohammadi,
Modeling, design and tailoring of a tough, strong and stiff multilayered bone graft material.
2022,
Pubmed
Mu,
Molecular Evolution of Tooth-Related Genes Provides New Insights into Dietary Adaptations of Mammals.
2021,
Pubmed
Munch,
Tough, bio-inspired hybrid materials.
2008,
Pubmed
Nepal,
Hierarchically structured bioinspired nanocomposites.
2023,
Pubmed
Nogueira,
Ancient enamel peptides recovered from the South American Pleistocene species Notiomastodon platensis and Myocastor cf. coypus.
2021,
Pubmed
O'Brien,
Revealing the structural and mechanical characteristics of ovine teeth.
2014,
Pubmed
Ortiz-Ruiz,
Structural differences in enamel and dentin in human, bovine, porcine, and ovine teeth.
2018,
Pubmed
Osborn,
The nature of the Hunter-Schreger bands in enamel.
1965,
Pubmed
Park,
Mechanical properties of human enamel as a function of age and location in the tooth.
2008,
Pubmed
Podsiadlo,
Ultrastrong and stiff layered polymer nanocomposites.
2007,
Pubmed
Popowics,
Enamel microstructure and microstrain in the fracture of human and pig molar cusps.
2004,
Pubmed
Pyenson,
Oh, the shark has such teeth: Did megatooth sharks play a larger role in prehistoric food webs?
2022,
Pubmed
Qi,
An Epidermis-like Hierarchical Smart Coating with a Hardness of Tooth Enamel.
2018,
Pubmed
Risnes,
Growth tracks in dental enamel.
1998,
Pubmed
Ritchie,
The conflicts between strength and toughness.
2011,
Pubmed
Rohland,
Extraction of highly degraded DNA from ancient bones, teeth and sediments for high-throughput sequencing.
2018,
Pubmed
Shao,
Repair of tooth enamel by a biomimetic mineralization frontier ensuring epitaxial growth.
2019,
Pubmed
Shen,
Deformation behavior of normal human enamel: A study by nanoindentation.
2020,
Pubmed
Stifler,
Crystal misorientation correlates with hardness in tooth enamels.
2021,
Pubmed
Velasco-Hogan,
Tooth structure, mechanical properties, and diet specialization of Piranha and Pacu (Serrasalmidae): A comparative study.
2021,
Pubmed
Wang,
Microstructure and self-sharpening of the magnetite cap in chiton tooth.
2014,
Pubmed
Wang,
Wild boar's tusk enamel: Structure and mechanical behavior.
2019,
Pubmed
Wang,
Controlling Enamel Remineralization by Amyloid-Like Amelogenin Mimics.
2020,
Pubmed
Wegst,
Bioinspired structural materials.
2015,
Pubmed
Wei,
Enamel Repair with Amorphous Ceramics.
2020,
Pubmed
Weng,
Giant panda׳s tooth enamel: Structure, mechanical behavior and toughening mechanisms under indentation.
2016,
Pubmed
Wong,
An enamel-inspired bioactive material with multiscale structure and antibacterial adhesion property.
2022,
Pubmed
Wu,
Special architecture and anti-wear strategies for giant panda tooth enamel: Based on wear simulation findings.
2022,
Pubmed
Xiao,
Research of the role of microstructure in the wear mechanism of canine and bovine enamel.
2019,
Pubmed
Yahyazadehfar,
The role of organic proteins on the crack growth resistance of human enamel.
2015,
Pubmed
Yan,
Evaluation of fracture toughness of human dentin using elastic-plastic fracture mechanics.
2008,
Pubmed
Yang,
A damage-tolerant, dual-scale, single-crystalline microlattice in the knobby starfish, Protoreaster nodosus.
2022,
Pubmed
,
Echinobase
Yeom,
Abiotic tooth enamel.
2017,
Pubmed
Yin,
Impact-resistant nacre-like transparent materials.
2019,
Pubmed
Zhang,
Hierarchy structure and fracture mechanisms of the wild wolf tusk's enamel.
2020,
Pubmed
Zhao,
Multiscale engineered artificial tooth enamel.
2022,
Pubmed
Zhao,
Role of Inorganic Amorphous Constituents in Highly Mineralized Biomaterials and Their Imitations.
2022,
Pubmed
Ziscovici,
Sea otter dental enamel is highly resistant to chipping due to its microstructure.
2014,
Pubmed
de Obaldia,
Analysis of the mechanical response of biomimetic materials with highly oriented microstructures through 3D printing, mechanical testing and modeling.
2015,
Pubmed